Generally Philippine ceilings are marine plywood or one of the cement board products such as Hardiflex. The price is about the same. There are plusses and minuses for both. Termites and rot don’t attack cement board but the cement board is more affected by roof leaks. Originally we were going to use Hardiflex but we decided to use plywood instead. Like gypsum board, cement board is a totally uniform material.

Plywood has some texture, some hint of once being a natural product. We just like the look of plywood ceiling better. First, angle bar is bolted around the perimeter of the room at the ceiling height. These are bolted to the hollow block wall using 3/8″ lag screws and lead expansion bolts. A 60cm (2′) x 120cm grid of angle bar is welded to these supports. The 120cm span is split using 1″ flat bar. The angle bar crossing the center of the room is heavier (2″ x 2″ x 3mm) to support the heavy Hunter ceiling fan.

Living In The Philippines. Topic: Different options for ceilings (Read 19419. Sells them but I cant find the installer for them.its quite hard to find workers.

Supports using scrap material extend from the ceiling angle bar to the steel roof rafters, further making the ceiling structure strong. Each 60 x 120cm plywood panel will have a bevel at the edge. The holes for recessed pin lighting will be cut before the plywood is installed. The plywood will be attached to the angle bar using pop rivets recessed into the plywood. The recesses will be filled and the ceiling painted.

A crown molding will cover the joint between the plywood and the wall. These are all very standard ceiling details on modest Philippine houses. We find this grid-pattern ceiling to be attractive. Fancier Philippine houses go in for all sorts of over-the-top ceiling elaborations, the more complex the better.

We’re building a house in the Philippines. Here’s how we’ll be installing our ceilings. Our ceilings will be about 30cm (1′) below the top of our walls and 3.1m (10′) above the finished floors.

We wanted high ceilings because we hope that the hot air will rise above us but also because it makes our modest rooms feel more spacious. Changing lightbulbs will be a challenge! Generally Philippine ceilings are marine plywood or one of the cement board products such as Hardiflex. The price is about the same. There are plusses and minuses for both.

Termites and rot don’t attack cement board but the cement board is said to be more affected by roof leaks. Originally we decided to use marine plywood. Cement board is a totally uniform material. Plywood has some texture, some hint of once being a natural product.

We like the look of plywood ceiling better but, based on comments we’ve received (see below) on this blog, we’ve decided to use 4.5mm Hardiflex. Ceilings can be supported by wooden joists or one of many suspended ceiling systems. We decided to use 1 1/2″ x 1 1/2″ 2.5mm steel angle bar as our main ceiling support system. This decision was a bit irrational, but not totally. We have good welders. Decent wood is expensive, more expensive than steel.

We paid P375 for 6M lengths of the angle bar. We painted the steel with epoxy primer, but then wood is normally treated with a preservative. The usual lightweight suspended ceiling systems just seemed too flimsy. As can be seen in the photo, our ceiling system is strong enough to walk on, a real advantage for storage, and repairs and maintenance. How to play chess in tamil pdf free download.